Pressure Washing Cost in Atlanta

Prices vary by size, condition, and access, so treat these as rough market ranges rather than a quote. Many companies price by the job or by square foot, and most have a minimum charge for small jobs.

Driveways are the most common request. A standard two car concrete driveway commonly runs somewhere around $100 to $250, with larger or heavily stained driveways costing more. Sidewalks and walkways are often added for a modest extra charge when they are done on the same visit.

Decks typically fall somewhere around $150 to $400 depending on size, railings, stairs, and the condition of the wood. Wood needs lower pressure and more care than concrete, which adds time. Patios, whether concrete or pavers, often land in a similar range to a driveway of the same size, with pavers sometimes costing more if the joints need attention afterward.

Whole house washing is usually the biggest line item. For a typical one or two story home, house washing commonly runs somewhere around $300 to $700, and larger homes, three story elevations, or heavy mildew can push it higher. Fences are often priced by linear foot, and both sides of a long fence can add up quickly.

Size is the starting point, but condition matters almost as much. A driveway washed every year cleans up quickly. One that has not been touched in five years, with oil stains, tire marks, and black algae in the expansion joints, takes far longer and may need a pre treatment.

Access is next. Steep driveways, homes on a slope, tall second story walls, and decks with lots of furniture or planters all slow the work. Water access matters too, since most crews connect to an outdoor spigot. Stains like rust, oil, and red clay often need specific cleaners and are not always fully removable, so a fair quote should be honest about that up front.

Bundling saves money. Washing the driveway, front walk, porch, and back patio on the same visit usually costs less than booking them separately, because the setup time is shared.

This is the part many homeowners do not realize until something gets damaged. Pressure washing uses high pressure water to blast away dirt and grime. It works well on hard surfaces like concrete driveways, sidewalks, and brick steps.

Soft washing uses much lower pressure combined with a cleaning solution that kills mildew, algae, and mold at the root. It is the safer choice for vinyl siding, painted wood, stucco, and other surfaces that high pressure can crack, gouge, or force water behind. It also tends to keep the house looking clean longer, because it treats the growth rather than just knocking it off the surface.

Wood decks and fences sit in the middle. Too much pressure raises the grain and leaves fuzzy, striped wood that needs sanding. The right approach is lower pressure, the right tip, and a cleaner suited to wood. If you plan to stain or seal a deck, washing first and letting it dry fully for a couple of days is the usual sequence.

For most homes around Atlanta, a yearly wash of the siding and a yearly cleaning of the driveway and walkways keeps things in good shape. Homes under heavy tree cover, near wooded lots, or with a north facing side that stays shaded and damp may need the siding done more often, because mildew and green algae come back faster there.

Timing helps. Many homeowners schedule a wash in late spring, after the worst of the pollen has dropped, so the house stays clean through summer. Fall is another good window to clean decks and patios before the leaves start piling up and staying wet through winter.

Washing before selling a home, before a family event, or before painting or staining is also common. Paint and stain stick much better to a clean surface, so washing is usually step one of any exterior paint or deck refinishing job.

Renting a pressure washer for a day typically costs somewhere around $60 to $120, and buying a decent consumer model can run a few hundred dollars. For a small patio or a short walkway, DIY can be a reasonable weekend project.

The risks show up on bigger or more delicate jobs. The wrong tip or holding the wand too close can etch concrete, leaving permanent swirl marks, and can tear up soft wood on decks and fences. On siding, high pressure can crack vinyl, strip paint, or force water behind the siding and into the wall. Working from a ladder with a pressure washer is also genuinely dangerous, because the kickback can throw you off balance.

A pro brings the right pressure for each surface, surface cleaners that leave concrete even without stripes, and cleaners that treat mildew instead of just spraying it around. For whole house washing, two story homes, or decks you plan to stain, that difference usually shows in the result.

Send a few photos of each area you want cleaned, from far enough back that the size is clear, plus close ups of any stains or green growth. Mention the surface type (concrete, pavers, wood, vinyl, painted siding), the number of stories, and anything in the way, like furniture or plants.

Solve Handyman offers pressure washing and soft washing across North Atlanta, including Atlanta, Marietta, Alpharetta, Roswell, and Acworth. Estimates are free, there is no trip fee, and same day service is available when the schedule allows. The crew is insured, family owned, and speaks English, Portuguese, and Spanish. If something is not right, they redo it at no cost. Gutter cleaning, deck repairs, or touch up painting can be added to the same visit. Call or text (770) 744-7051 with your photos to get started.